Network Video Recorder Quick Start Guide
26
After rebooting all the manual records enabled are cancelled.
Steps:
1. On the live view window, right click the window and move the cursor to the Start Recording option, and
select Continuous Record or Motion Detection Record on your demand.
Figure 3. 14 Start Recording from Right-click Menu
2. Click the Yes button in the pop-up Attention message box to confirm the settings. All the channels will start
to record in the selected mode.
3.12 Playback
The recorded video files on the hard disk can be played back in the following modes: instant playback, all-day
playback for the specified channel, and playback by normal/event/smart/tag/sub-periods/external file search.
Steps:
1. Enter playback interface.
Menu > Playback
2. Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.
3. You can use the toolbar in the bottom part of Playback interface to control playing progress.
4. Select the channel(s) to execute simultaneous playback of multiple channels.
Figure 3. 15 Playback Interface
To Next Page
Loading...
Need help?
General
