Digital Video Recorder User Manual
124
5. Click OK.
In the User Management interface, the added new user is displayed on the list.
11.1.2 Edit the Admin User
For the admin user account, you can modify your password and unlock pattern.
Steps
1. Go to System → User.
2. Select the admin user from the list.
3. Click Modify.
Figure 11-1 Edit User (Admin)
4. Edit the admin user information as desired, including a new admin password (strong password is
required) and MAC address.
5. Edit the unlock pattern for the admin user account.
1) Check Enable Unlock Pattern to enable the use of an unlock pattern when logging in to the
device.
2) Use the mouse to draw a pattern among the 9 dots on the screen, and release the mouse
when the pattern is done.
To Next Page
Loading...
Need help?
General