Digital Video Recorder User Manual
138
transmitted data packet.
Steps
1. Go to Maintenance → Network → Detection.
2. Select a network card in Select NIC.
3. Enter the destination IP address in Destination Address.
4. Click Test.
Figure 12-2 Test Network Delay and Packet Loss
12.3.3 Export Network Packet
After the recorder accessing network, you can use USB flash drive to export network packet.
Before You Start
Prepare a USB flash drive to export network packet.
Steps
1. Insert the USB flash drive.
2. Go to Maintenance → Network → Detection.
3. Select network card in Select NIC.
4. Select the USB flash drive in Device Name. You can click Refresh if the connected local backup
device cannot be displayed.
Figure 12-3 Export Network Packet
5. Optional: Click Status to view the network status.
6. Click Export.
Note
It will export 1 MB data each time as default.
12.3.4 Network Resource Statistics
The remote access, including web browser and client software, will consume output bandwidth.
To Next Page
Loading...
Need help?
General