Do you have a question about the HIKVISION DS-K1101M and is the answer not in the manual?
Type | Basic access control reader |
---|---|
Certification | FCC, CE |
Product color | Black, Silver |
LED indicators | Status |
Access code reader | - |
Fingerprint reader | No |
Authentication type | Access chip/card |
Supported protocols | Mifare |
RFID reading distance | 50 mm |
Access chip/card reader | Yes |
International Protection (IP) code | IP64 |
Processor frequency | 13.56 MHz |
Operating temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 10 - 90 % |
RS-485 ports | 1 |
Depth | 20.5 mm |
---|---|
Width | 92.3 mm |
Height | 132 mm |
Weight | 140 g |
Details the device's compliance with FCC Rules, including conditions for operation.
Essential advice for ensuring proper card reader functionality and installation safety.
Illustrations of the front panel for DS-K1101 and DS-K1102 series card readers.
Displays the rear panel components of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series.
Shows the side profile of DS-K1103 and DS-K1104 series card readers.
Guide for inserting a PSAM card into the reader, applicable to CPU card models.
Explains the function and settings of the DIP switch module for parameter configuration.
Details cable color codes and provides wiring instructions for RS-485 and Wiegand modes.
Lists the various audio alerts and their meanings during card reader operation.
Explains the different LED light patterns and their corresponding operational states.