HIKVISION DS-K1102M User Manual

DS-K1100 Series Card Reader
vii
reader, you must use RVVP cable above 0.5 to connect them.
 If the card reader is installed outside or in environment easy to
permeable, it is advisable to install a waterproof shield.
 If you need to install several card readers, the distance among them
must over 30cm.
 To reduce the noise in long distance transmission, the shield of cable
should connect to the GND of both controller and card reader
terminal.

HIKVISION DS-K1102M Specifications

General

Internal	No
Certification	IP64 CE, FCC
Product color	Black
LED indicators	Power, Status
Housing material	Acrylonitrile butadiene styrene (ABS)
Compatible memory cards	-
Input voltage	12 V
Output current	500 mA
Power source type	DC
Power consumption (max)	2 W
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %
Interface	RS485 / Wiegand
Supported protocols	Mifare
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity	0
Built-in processor	Yes
International Protection (IP) code	IP64
Frequency	13.56 MHz
Maximum read range	50 mm

Weight and Dimensions

Depth	121 mm
Width	86.5 mm
Height	14 mm
Weight	140 g