HIKVISION DS-K1102M User Manual

DS-K1100 Series Card Reader
viii
Content
Chapter 1 Introduction ........................................................ 1
1.1 Front View ..................................................................... 1
1.2 Rear View ...................................................................... 3
1.3 Slide View ...................................................................... 5
Chapter 2 Installation .......................................................... 7
2.1 Installing PSAM Card ..................................................... 7
2.2 Introduction for DIP Switch ........................................... 7
2.3 Definition of Cable ......................................................... 8
2.4 Wiring Cables ................................................................ 9
2.5 Installing Card Reader .................................................. 11
Chapter 3 Sound Prompt and Indicator .............................. 13

HIKVISION DS-K1102M Specifications

General

Internal	No
Certification	IP64 CE, FCC
Product color	Black
LED indicators	Power, Status
Housing material	Acrylonitrile butadiene styrene (ABS)
Compatible memory cards	-
Input voltage	12 V
Output current	500 mA
Power source type	DC
Power consumption (max)	2 W
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %
Interface	RS485 / Wiegand
Supported protocols	Mifare
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity	0
Built-in processor	Yes
International Protection (IP) code	IP64
Frequency	13.56 MHz
Maximum read range	50 mm

Weight and Dimensions

Depth	121 mm
Width	86.5 mm
Height	14 mm
Weight	140 g