HIKVISION DS-KD8003 Series User Manual

Note
The mounng frame should be placed exactly as shown below for this step. The tamper plate
should be at the low right of the rst grid.
Figure 4-31 Mounng Frame
5.
Thread the module-connecng line across the thread holes of the frame. Pass the main unit
connecng line across the thread hole to the top grid.
DS-KD8003 Series Module Door Staon User Manual
43

HIKVISION DS-KD8003 Series Specifications

General

Brand	HIKVISION
Model	DS-KD8003 Series
Category	Intercom System
Language	English