HIKVISION DS-KH6310-W(L) User Manual

Video Intercom Indoor Station·User Manual
32
When the device is not activated, the basic operation and remote operation of device
cannot be performed.
8.2 Editing Network Parameters
Purpose:
You can edit the network parameters of online devices.
Steps:
1. Select an online device in the online devices list in the lower part of the batch
configuration software interface.
2. Click the Edit NET Parameters button.
Figure 8-2 Edit NET Parameters
3. Enter a new IP address, subnet mask, gateway address, port No. and the password.
4. Click the OK button to accomplish the editing.
Figure 8-3 Edit Network Parameters
 The default port No. is 8000.
 After editing the network parameters of device, you should add the devices to the
device list again.

HIKVISION DS-KH6310-W(L) Specifications

General

Brand	HIKVISION
Model	DS-KH6310-W(L)
Category	Intercom System
Language	English