HIKVISION DS-KH6310-W(L) User Manual

Video Intercom Indoor Station·User Manual
78
Figure 9-16 System Maintenance Interface
 Only DS-KH8500-T/DS-KH8501-WT/DS-KH8300-T/DS-KH8301-WT models indoor
stations support TF card function.
 Only DS-KH8501-WT/DS-KH8301-WT/DS-KH6310-W/DS-KH6310-W(T) models indoor
stations have the Upgrade tab on the system maintenance interface.
 After clearing the screen, you can press and hold to exit clear screen mode.
10.3.7 Configuration Settings
Purpose:
On the configuration settings interface, you can set and view the local information,
configure the network, manage devices, synchronize the device time, and restore the
default settings.
Setting Local Information
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Local Info tab to enter the local information settings interface.
4. Select the indoor station type: Indoor Station, or Indoor Extension.
Indoor Station: Set the Room No.
Indoor Extension: Set the Extension No., and set a room name.
5. Press the drop-down list to select a video standard: PAL, or NTSC.
6. Set the maximum live view duration of the device.
 The Extension No. is numeric from 1 to 5, i.e., at most 5 indoor extensions can
connect to one indoor station.
 Only DS-KH8301-WT and DS-KH8501-WT require setting the video standard, and the
system will reboot after selecting video standard.

HIKVISION DS-KH6310-W(L) Specifications

General

Brand	HIKVISION
Model	DS-KH6310-W(L)
Category	Intercom System
Language	English