HIKVISION DS-KH6310-W(L) User Manual

Video Intercom Indoor Station·User Manual
48
 After editing the local network parameters of device, you should add the devices to
the device list again.
Linked Devices Network Configuration
Purpose:
In the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps:
1. Click the Linked Network Configuration button to enter linked network configuration
interface.
Figure 8-37 Linked Devices Network Configuration Interface (Indoor Station)
Figure 8-38 Linked Devices Network Configuration Interface (Indoor Extension)
2. Select the main door station type from the drop-down list: Indoor Station or Indoor
Extension.
Indoor Station: Enter the master station IP address, (main) door station IP address, SIP
server IP address, management center IP address, and doorphone IP
address.
Indoor Extension: Enter the IP address of main indoor station.
3. Select the connection mode from the drop-down list menu: Same LAN, or Different
LANs.
4. Click the Apply button to enable the settings.

HIKVISION DS-KH6310-W(L) Specifications

General

Brand	HIKVISION
Model	DS-KH6310-W(L)
Category	Intercom System
Language	English