Video Intercom Indoor Station·User Manual
83
When the IP camera added successfully, you can get the live view of main door station
on the live view interface.
The indoor station can add 8 doorphones at most, and add 16 cameras and
DVR/DVS/NVR channels in total.
The added IP camera, DVR/DVS/NVR, and doorphone can be edited, deleted, and
cleared.
Adding Device (Indoor Extension)
Indoor extension can only connect to the indoor station.
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Device tab to enter the device management interface.
4. Press the Indoor Station tab to pop up the device information dialogue box.
Figure 9-25 Indoor Station Adding Interface (Indoor Extension)
5. Enter the IP address of the indoor station, and press the tab to save the settings.
SCP (Security Control Panel)
Purpose:
The indoor station supports connecting to the security control panel (SCP). Alarm
messages from indoor stations can be automatically uploaded to the center once the
indoor station connects to the security control panel.
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Device tab to enter the device management interface.
4. Press the SCP tab to pop up the SCP adding dialogue box.