Video Intercom Demo Case·User Manual
9
Make sure you have configured the room No. of the device.
3.2.2 Issue Card
You cannot open door by swiping the card until you have issue the card.
Issue Card via Main Card: You can swipe card to issue it after swiping the main card in
advance.
Step:
1. Swipe the main card on the card reading area, and hear two beeps.
2. Swipe the unauthorized sub cards in turn after hearing a beep.
3. Swipe the main card again to end the card issuing process.
DS-KD-M supports Mifare card, DS-KD-E supports EM card.
If the amount of sub cards exceeds 2500, no more sub card can be issued.
3.2.3 Unlock Door
Unlock Door by Password
You can unlock the door by inputting the password via the keypad module.
Three formats of password are supported. They are:
1. 【#】+ Public Password +【#】
2. 【#】+ Room No. + Password +【#】
3. 【#】+ Room No. + Duress Password +【#】
Password contains 6 digits.
You’re allowed to set 3 public passwords via iVMS-4200.
The password varies according to different rooms.
Unlock Door by Card
Before you begin:
Make sure the card has been issued. You can issue the card via the door station, or via
iVMS-4200 client software.
Steps:
Swipe the card on the card induction area to unlock the door.
The main card does not support unlocking the door.
To Next Page
Loading...
Need help?
General
