HIKVISION DS-KH9510-WTE1(B) User Manual

Edit a name for the device as you want.
Address
Input the device's IP address. The IP address of the device is obtained
automacally in this adding mode.
Port
Input the device port No. The default value is 8000.
User Name
Input the device user name. By default, the user name is admin.
Password
Input the device password.
6.
Oponal: You can check the checkbox Export to Group to create a group by the
device name. All the channels of the device will be imported to the corresponding
group by default.
The client also provides a method to add the oine devices. Check the checkbox
Add Oine Device, input the required informaon and the device channel
number and alarm input number, and then click Add. When the oine device
comes online, the soware will connect it automacally.
Note
●
Add Mulple Online Devices: If you want to add mulple online devices to the
client soware, click and hold Ctrl key to select mulple devices, and click Add
to Client to open the device adding dialog box. In the pop-up message box,
enter the user name and password for the devices to be added.
●
Add All the Online Devices: If you want to add all the online devices to the client
soware, click Add All and click OK in the pop-up message box. Then enter the
user name and password for the devices to be added.
3.2.2 Modify Network Informaon
Select the device from the device list, click , and then you can modify the network
informaon of the selected device.
Note
You should enter the admin password of the device in the Password eld of the pop-
up window to modify the parameters.
Video Intercom 9 Series Indoor Staon Conguraon Guide
37

HIKVISION DS-KH9510-WTE1(B) Specifications

General

Brand	HIKVISION
Model	DS-KH9510-WTE1(B)
Category	Intercom System
Language	English