4 Installaon
4.1 Door Staon Installaon
4.1.1 DIP Switch Sengs
DIP switch 1 is used to coding the room No. of door staon. The No. should be
unique.
DIP switch 2,3,4 are used to coding the unlock
duraon of the door staon.
Figure 4-1 DIP Switch
The
relaonship between address of door staon and DIP switches is shown as
below.
Table 4-1 Door
Staon Address
DIP 1 Address
OFF 1
ON 2
The relaonship between unlock duraon and DIP switches is shown as below.
Video Intercom Analog Bundle User Manual
13