HIKVISION DS-KV8102-1A User Manual

Video Intercom Door Station·User Manual
30
 There are 4 IO Input Terminals, Terminal 1~4 correspond to ALARM_1~ALARM_4
interfaces of door station. You can enable/disable IO In or set IO In as door magnetic
or door switch by selecting from the dropdown list.
 There is only 1 IO Output Terminals, which corresponds to DR_NC/DR_COM/DR_NO
interface of door station. You can enable/disable IO Out or set IO Out as electric lock
by selecting from the dropdown list.
Volume In and Out
Click to enter the volume in and out interface. Slide the slider to adjust
the volume input and volume output.
Figure 7-27 Volume In and Out Interface
Calling Buttons
Click Calling Buttons to enter the calling buttons settings interface. Select the calling
buttons to set the corresponding floor No. and room No. and click Apply to save the
settings.
Figure 7-28 Calling Buttons Interface

HIKVISION DS-KV8102-1A Specifications

General

Brand	HIKVISION
Model	DS-KV8102-1A
Category	Intercom System
Language	English