Video Intercom Door Station·User Manual
32
Figure 7-30 Linked Devices Network Configuration Interface
After adding master station IP Address, the linkage between indoor station and
master station can be realized.
After adding the door station IP Address, the video intercom between indoor stations
of same building can be realized.
After adding SIP Server Address IP, the video intercom of same community: video
intercom between indoor stations of different building, calling indoor station from
outer door station and video intercom between management center and indoors.
After adding management center IP Address, the events can be uploaded to the
management center.
FTP
Steps:
3. Click to enter the FTP parameter interface (the FTP parameter interface is
shown in the Figure 7-31).
4. Select IP Address from the dropdown list of Server mode, and input the FTP server IP
Address, Port No..
5. Check the checkbox to enable the anonymity (optional). Select the directory structure
and configure the separator, naming item and naming element.
6. Click Apply to accomplish the setting of FTP parameters.
The default Port No. is 21.
To enable anonymity or not is according to whether the FTP server enables
anonymity.
After configuring the FTP parameters, the capture pictures of door station will be
uploaded to the FTP server.
To Next Page
Loading...
Need help?
General
