QSG EKI-K41B44W Kit 110520NA 14
Figure 9, Install the Camera
The supplied screw package contains both self-tapping screws and expansion bolts.
If the ceiling is concrete, expansion bolts are required to fix the camera. If the ceiling
is wood, self-tapping screws are required.
5.
Adjust the view angle of the camera.
3-axis (pan/tilt/rotation) adjusting allows adjustment for optimum camera rotation and placement.
a) Loosen the 3-axis adjusting nut.
b) Adjust the panning, tilting. and rotation position of the camera. The panning adjusting range is from
0° to 360°, tilting range is from 0° to 90° and rotation range is 0° to 360°.
c) Tighten the adjusting nut.
Figure 10, View Angle Adjustment
3.2 Mounting with a Junction Box
Before You Start
Both wall mounting and ceiling mounting are suitable for the bullet camera. Wall mounting will be taken as
an example in this section.
To Next Page
Loading...
Need help?
General
