HIKVISION H264 User Manual

Network Camera User Manual
39
1. Enter the DST configuration interface.
Configuration > System > System Settings > DST
Figure 6-9 DST Settings
2. Select the start time and the end time.
3. Select the DST Bias.
4. Click Save to activate the settings.
6.2.6 Configuring External Devices
Purpose:
For the device supported external devices, including the wiper on the housing or the
LED light, you can control them via the Web browser. External devices vary
according to the different camera models.
Steps:
1. Enter the External Device configuration interface.
Configuration > System > System Settings > External Device
Figure 6-10 External Device Settings
2. Check the Enable Supplement Light checkbox to enable the LED Light.
3. Move the slider to adjust the low beam brightness and high bean brightness.

HIKVISION H264 Specifications

General

Brand	HIKVISION
Model	H264
Category	Security Camera
Language	English