Digital Video Recorder User Manual
180
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the
checkbox before the Continue to use this disk when self-evaluation is failed item.
Figure 12-28 S.M.A.R.T Settings Interface
12.9 Detecting Bad Sector
Purpose
You can detect the bad sector of the HDD to check the status of the HDD.
Step 1 Go to Menu > Maintenance > HDD Detect > Bad Sector Detection.
Step 2 Select a HDD and click the Detect button to start detecting.
Figure 12-29 Bad Sector Detecting
Step 3 You can click the Pause button to pause the detection and click the Resume button to
resume the detection.
Step 4 If there is error information about the HDD, you can click the Error Info button to view the
information.
To Next Page
Loading...
Need help?
General
