Network Traffic Camera • User Manual
35
Edit Record Schedule
Select the day to set the record schedule.
Set all-day record or segment record.
If you want to configure the all-day recording, check the All Day checkbox.
If you want to record in different time sections, check the Customize checkbox. Set the Start
Time and End Time.
The time of each segment cannot be overlapped. Up to 4 segments can be configured.
The default record type is Normal and you cannot edit it.
Check Select All and click Copy to copy settings of this day to the whole week. You can also
check any of the checkboxes before the date and click Copy.
Click OK to save the settings and exit from the interface.
Click Save to save the settings.
Configure Storage Management
Purpose:
You can manage the storage, view the TF card information, format the TF card, etc.
Go to Configuration > Device Configuration > Encoding and Storage > Redundant Storage.
To Next Page
Need help?
General
