Network Traffic Camera • User Manual
89
(Optional) For Partial Import mode, you should select configuration type(s) to import by
checking the corresponding checkbox(s).
Click Browse to select the saved configuration file.
Click Import to start importing the configuration file.
You need to reboot the camera after importing configuration file.
Upgrade the System
Go to Configuration > Device Configuration > System Maintenance > Import Module File.
Import Module File
Click Browse to select the module file.
Click Import to import the module file.
Remote Upgrade
Go to Configuration > Device Configuration > System Maintenance > Upgrade.
Click Browse to select the local upgrade file.
Click Upgrade to start remote upgrade.
(Optional) Click Configuration > System Configuration > Device Information, if upgrading
succeed, Smart Module Status will display normal.
The upgrading process will take 1 to 10 minutes. Do not disconnect power of the camera or reboot
the camera during the process, and the camera reboots automatically after upgrade.
0403101090730
To Next Page
Loading...
Need help?
General
