HIKVISION iDS-TCD403-BI User Manual

Chapter 10 Maintenance
10.1 View Device Informaon
Basic Informaon and Algorithms Library Version
Go to Conguraon → Device Conguraon → System → Device Informaon to view the basic
informaon and algorithms library version of the device.
You can edit Device Name and Device No. The device No. is used to control the device. It is
recommended to reserve the default value.
Device Status
Go to Conguraon → Device Status to view the device status.
10.2 Log
10.2.1 Enable System Log Service
The security audit logs refer to the security operaon logs. You can search and analyze the security
log
les of the device so as to nd out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
aer device boong. Due to limited storage space, you are recommended to save the logs on a log
server.
Steps
1. Go to
Conguraon → Device Conguraon → System → Service .
2. Check Enable Syslog Service.
3. Enter IP Address and Port of the log server.
4. Click Save.
Result
The device will upload the security audit logs to the log server regularly.
10.2.2 Search Log
Log helps to locate and troubleshoot problems.
Steps
1. Click Log.
2. Set search condions.
3. Click Search.
Network Trac Camera (for Trac Flow Camera) User Manual
40

HIKVISION iDS-TCD403-BI Specifications

General

Brand	HIKVISION
Model	iDS-TCD403-BI
Category	Security Camera
Language	English