HIKVISION iDS-TCM403-AI User Manual

Network Traffic Camera User Manual
63
Chapter 15 Exception
Purpose:
The exception type can be HDD error, network disconnected, IP address conflicted,
and vehicle detector exception.
Steps:
1. Go to Configuration > Device Configuration> Exception.
2. Select the exception type and the corresponding trigger methods.
Figure 15-1 Exception Settings
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
 Alarm Dwell Time(s)
The waiting time for the alarm triggered. And you can set the alarm dwell time from 0
to 180s.
3. Click Save to save the settings.

HIKVISION iDS-TCM403-AI Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-AI
Category	Security Camera
Language	English