69
Export Configuration File.
Figure 16-9 Export Configuration File
2. Click Export and set the saving path to save the configuration file in local
storage.
16.7 Import Configuration File
Purpose:
Configuration file is used for the batch configuration of the camera, which can
simplify the configuration steps when there are a lot of cameras needing
configuration.
Steps:
1. Go to Configuration > Device Configuration > System Maintenance >
Import Configuration File.
Figure 16-10 Import Configuration File
2. Select Importing Method. Import All and Partial Import are selectable.
3. (Optional) For Partial Import mode, you should select configuration type(s) to
import by checking the corresponding checkbox(s).
4. Click Browse to select the saved configuration file.
5. Click Import to start importing the configuration file.
Note: You need to reboot the camera after importing configuration file.
16.8 Upgrade the System
Steps:
To Next Page
Loading...
Need help?
General
