3.4.6 WHITE BALANCE
White balance is the white rendition function of the
camera to adjust the color temperature according to
the environment. It can remove the unrealistic color
casts in the image.
MANUAL, ATW (Auto-Tracking White Balance),
AWC→SET are selectable.
Manual: Allows you to adjust the white balance by
customizing the BLUE and RED value, which range from
1 to 100.
ATW: Refers to the white balance is continuously being
adjusted in real-time according to the color
temperature of the scene illumination.
AWC→SET: Similar with ATW, the white balance is
continuously being adjusted in real-time according the
scene if AWC→SET is selected, however, if the scene
changed, you have to go to AWC→SET to get another
proper white balance for the new scene.
3.4.7 DAY & NIGHT
Color, B/W, and EXT are selectable for DAY & NIGHT
switch.
COLOR: the image is colored in day mode all the time.
B/W: the image is black and white all the time, and the
IR LED turns on in the low-light conditions.
EXT: The image switches from color to B/W or from
B/W to color automatically according to the light
condition. And you can select to turn on or turn off the
IR LED according to different illuminations.
3.4.8 SPECIAL
In the SPECIAL sub-menu, you can set the camera title,
the digital effect of the image, the motion detection,
privacy mask, dead pixel correction of the camera.
CAMERA TITLE: Edit the camera title on this section.
D-EFFECT：OFF, MIRROR, V-FLIP, and ROTATE are
selectable for the mirror.
OFF: The mirror function is disabled.
MIRROR: The image flips 180 degree horizontally.
V-FLIP: The image flips 180 degree vertically.
ROTATE: The image flips 180 degree both horizontally
and vertically.
To Next Page
Loading...
Need help?
General
