extended period, please replace the lens cap to
protect the sensor from dirt.
Do not aim the camera at the sun or extra bright
places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the
endurance of sensor at the same time.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold, dusty
or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is
required for operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Improper use or replacement of the battery may
result in hazard of explosion. Replace with the same
or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery
manufacturer.
Introduction Chapter 1
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor
1080p resolution
OSD menu, Day/Night switch, Smart IR, ACG
IR cut filter
2.8 to 12 mm motorized vari-focal lens
Internal 3-axis adjustment
Built-in heater
Note:
The built-in heater function varies according to different
models.
1.2 Overview of Turret Camera
To Next Page
Loading...
Need help?
General
