HIMA HIMax X-CPU 01 User Manual

4 Start-up X-CPU 01
Page 32 of 52 HI 801 009 E Rev. 4.00
Inserting and Removing a Module
Swiveling a Module in and out
Securing and Releasing a Module
Figure 8: Mounting and Removing a Module
i
If the HIMax system is operating, do not open the cover plate of the fan rack for more than
a few minutes (< 10 min) since this affects the forced cooling.
4.1.4 Configuring the Module in SILWorX
The processor module is configured in the SILworX Hardware Editor.
The Ethernet interface of the processor module must be configured. Each of the following
chapters describes a detail view tab.
Ensure proper setting ot the IP address!

HIMA HIMax X-CPU 01 Specifications

General

Brand	HIMA
Model	HIMax X-CPU 01
Category	Computer Hardware
Language	English