Installation OCTOPUS OS3
Release
01
02/2019
15
1.4 Power supply
1.4.1 Supply voltage with the characteristic value N9
The power is supplied via a “K”-coded M12 plug.
For information about the position on the device see chapter “Device views”
on page 14.
Further information:
See “Device name and product code” on page 12.
1.5 Ethernet ports
You have the option to connect end devices or other segments to the ports
of the device via twisted pair cables.
You find information on pin assignments for making patch cables here:
“Pin assignments” on page 16
10/100/1000 Mbit/s twisted pair port
This port is an 8-pin, “X”-coded M12 socket.
The 10/100/1000 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX/
1000BASE-T standard.
This port supports:
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
1000 Mbit/s full duplex
Autocrossing (if autonegotiation is activated)
Autonegotiation
Autopolarity
The port casing is electrically connected to the front panel.
The pin assignment corresponds to MDI-X.
To Next Page
Loading...
Need help?
General
