Hirschmann OCTOPUS OS3 User Manual

Installation OCTOPUS OS3
Release 01 02/2019
25
2.3 Connecting the supply voltage
 Mount the power supply cable to the power supply connector of the
device.
You find the prescribed tightening torque in chapter:
“General data” on page 31
 Enable the supply voltage.
WARNING
ELECTRIC SHOCK
Connect only a supply voltage that corresponds to the type plate of your
device.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.

Hirschmann OCTOPUS OS3 Specifications

General

Brand	Hirschmann
Model	OCTOPUS OS3
Category	Network Router
Language	English