Hisense 50H8C User Manual

17
Parental Controls
The
Parental Controls
setting allows you to block content that is not appropriate for children to watch. You can do this by creating
a 4-digit passcode. The factory-default passcode is 0000.
Turning Parental Controls 'On'
To access
Parental Controls
:
1. Press the [
Quick Setup
] menu button on your remote.
2. Press the right arrow button to display the full menu settings.
3. Select
System > Parental Controls
.
4. Press [
OK
] on your remote.
An
Enter PIN
window displays.
Using the numerical keypad on your remote, enter the factory-default passcode 0000 and press [
OK
].
Press the right arrow button on the D-pad to turn the locks 'On'.
You will see the other Parental Control settings change from a greyed out state and become highlighted. When this occurs, begin
adding other settings to the Block Time, Channel Block, Program Block, Input Block, Change PIN or Restore Parental Control
Defaults features.
All ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13 rating, then the
higher ratings (R and NC-17) are automatically blocked too.
Channel Block
Block programs by channels when you turn on the
Parental Controls
feature.
Block Time
Choose a time of day that you'd like to start blocking certain programs.
Program Block
Block programs according to their TV or MPAA (movie) rating when you have turned on the Parental Controls feature and selected
that rating to be blocked.
Input Block
Block content from devices that are connected to certain TV ports.
Change PIN
Change your PIN that you use to access Parental Controls.
Restore Parental Control defaults
Restore Parental Controls back to the factory setting.
Parental Controls
NOTES

Hisense 50H8C Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	high dynamic range, local dimming, 4k upscaling
Tuner	digital
Screen Size	49.5 inches, 50 inches
Refresh Rate	60hz
Closed Captioning	yes
Motion Enhancement	motion rate 120
HDR	yes
HDR Format	hdr 10
Built-In Speakers	yes
Surround Sound	dolby digital
Speakers Output	20 watts
HDMI ARC Ports	yes
USB Ports	3
USB 2.0 Ports	2
USB 3.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	0
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	standard
3D	no
Power Consumption	145 kilowatt hours
Depth with Stand	9.7 inches
Height with Stand	27.7 inches
Width with Stand	44.1 inches
Net Weight with Stand	28.2 pounds
Depth without Stand	3.3 inches
Height without Stand	25.6 inches
Net Weight without Stand	27.6 pounds