Hisense 85A7K User Manual

1
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand or Wall Mount Bracket
1. Carefully place your TV facedown on
a soft, flat surface to prevent damage
to the TV or scratching to the screen.
2. Take out the 2 stands from the
accessory bag and then insert the
stands into the bottom slots of the TV.
3. Secure the Base Stand to the TV with
the 4 screws in the accessory bag
tightly.
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Installing the stand
Base Stand
Screws:
M4×16
Base Stand
For 43"
For 85"
ATTENTION
Follow the illustrations and textual instructions below to complete the stand installation steps.
Two people and above are required.
1. First follow the instructions on the
carbon box. Open the box, take out
the base stands and then take out
the upper cushion, left cushion and
right cushion. Make sure the side of
left and right cushion is aligned with
the gap of upper cushion(to avoid the
interference between cushions and
the base stand when installing it), just
as the picture shows below.
2. Two people stand on each side of the
television. Hold the back side of TV
with one hand and grasp the buckle
on lower box with the other hand.
Place the TV on the cushions with the
screen face upward. Make the handle
touch upper cushion, back cover touch
the left and right cushions. When
nished, take o󰀨 the lower box.
left and right cushion
upper cushion
align
align
700-800mm
left and
right
cushion
handle
upper
cushion
about 50 mm
screen face upward

Hisense 85A7K Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	85 \
Display brightness	- cd/m²
Display technology	DLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (typical)	-
Display diagonal (metric)	215 cm
Video upscaling	Yes
Video formats supported	H.264, HEVC, HEVC/H.265, MPEG2, MPEG4, VP9
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Number of OSD languages	33
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	- W
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Audio decoders	DTS, Dolby Atmos
RMS rated power	36 W
Number of speakers	2
PC in (D-Sub)	No
Audio (L/R) in	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Product color	Black
Video apps	Amazon Prime Video, DAZN, Disney+, Movistar, Netflix, YouTube
Operating system installed	VIDAA
Cables included	AC
Tuner type	Analog & digital
Analog signal format system	PAL BG, PAL DK, SECAM B/G, SECAM D/K
Digital signal format system	DVB-C, DVB-S2, DVB-T, DVB-T2
Operating temperature (T-T)	5 - 45 °C

Weight and Dimensions

Depth (with stand)	455 mm
Height (with stand)	1156 mm
Depth (without stand)	91 mm
Width (without stand)	1899 mm
Height (without stand)	1089 mm
Weight (without stand)	42000 g