Hisense AX3100G User Manual

• The subwoofer is out of range, please move
the subwoofer closer to the soundbar. Make
sure the subwoofer is within 5 m of the
soundbar (the closer the better).
• The soundbar may have lost connection with
the subwoofer. Re-pair the units by following
the steps on the section “Pairing the Wireless
Subwoofer with the Soundbar”.
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
The device is not muted.
12. Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
• Ensure that the AC cord of the unit is
properly connected .
• Ensure that there is power
at the AC outlet.
• Press standby button to turn the unit on.
Remote control does not work
• Before you press any playback control
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-)
aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor
on the front of the unit.
No sound
• sserP .detum ton si tinu eht taht erus ekaM
or VOL+/– button to resume normal
listening.
• Press
button on the unit or on the remote
control to switch the soundbar to standby
mode. Then press the
button again to
switch the soundbar on.
• Unplug both the soundbar and the subwoofer
from the mains socket, then plug them again.
Switch on the soundbar.
• Ensure the audio setting of the input source
(e.g. TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital mode while
using digital (e.g. HDMI, OPTICAL, COAXIAL)
connection.
19
11. Setup Menu
1. During ON mode, press and hold the
button for 3 seconds to open the menu.
2. Select the content with
/ buttons.
3. Change the initial values for each of the
settings with VOL +/- buttons.
4. Press the
button
and exit the settings.
• If no button is pressed within 10 seconds, the
system will automatically exit the menu.
Display
(press
/
)
Description
(press VOL + / - )
1
.
(
MUSIC, MOVIE, NEWS, SPORT,
NIGHT, GAME, AI EQ)
2
Switch Surround Sound
[ON / OFF]
3
Adjust the Bass Level
4
Adjust the Treble Level
5
Adjust the Brightness
(
6
Switch Auto Wake
[ON / OFF]
7
8
Switch Auto Standby
[ON / OFF]
Switch Beep
[ON / OFF]
9
13
Set the Audio Delay
(AV SYNC)
12
Switch: DTS Neural
[ON / OFF]
Switch: BassBoost
[ON / OFF]
Switch: DTS Virtual:X
[ON / OFF]
10
Adjust DTS DRC Level: DRC 0/1/2
11
14
Adjust DTS Dialog Control
Level: DCL 0/1/2/3/4/5/6

Hisense AX3100G Specifications

General

Audio decoders	DTS, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital Plus
RMS rated power	280 W
Audio output channels	3.1 channels
Enhanced Audio Return Channel (eARC)	Yes
Soundbar speaker RMS power	- W
Woofer diameter (imperial)	4 \
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6.5 \
Display type	LED
Product color	Black
Audio formats supported	FLAC, MP3, WAV, WMA
Wi-Fi	No
Bluetooth version	5.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	20 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	15 W
Cables included	AC, HDMI, Optical
Package weight	1016 g

Weight and Dimensions

Depth	90 mm
Width	920 mm
Height	60 mm
Soundbar weight	2540 g
Subwoofer depth	304 mm
Subwoofer width	214 mm
Subwoofer height	294 mm
Subwoofer weight	5170 g