Hisense AX3120G User Manual

4. Preparations
4.1 Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
•
Even if the Remote Control is operated within
the eective range 19.7 feet (6m), remote
control operation may be disrupted if there
are any obstacles between the unit and the
remote control.
•
If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infrared
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
may operate incorrectly.
4.2 Replace the Remote Control Battery
Precautions Concerning Batteries
• Be sure to insert the batteries with correct
positive “
⊕
” and negative “ ” polarities.
• Use batteries of the same type. Never use
• Either rechargeable or non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
•
the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote
control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet
object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time, as
corrosion or battery leakage may occur and
result in physical injury, and/or property
• Do not use any batteries other than those
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is
1 Press and slide the back
cover to open the battery
compartment of the
remote control.
2 Insert two AAA size
batteries . Make sure the
(+) and (–) ends of the
batteries match
the (+) and (–) ends
indicated in the battery
compartment.
3 Close the battery
compartment cover.
4.3 Placement and Mounting
Placement
A If your TV is placed on a table, you can place
the unit on the table directly in front of the
TV stand, centered with the TV screen.
B If your TV is attached to a wall, you can mount the
unit on the wall directly below the TV screen.
Note: The unit should be placed to avoid covering the
signal receiver of the TV or the remote of TV can not work.
A B
10

Hisense AX3120G Specifications

General

Audio decoders	DTS Virtual:X, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital Plus
Equalizer modes	Bass, Movie, Music, TV
RMS rated power	360 W
Audio output channels	3.1.2 channels
Soundbar mode control	Yes
Rear speaker RMS power	0 W
Audio Return Channel (ARC)	No
Number of speakers	6
Soundbar speaker RMS power	240 W
Subwoofer type	Active subwoofer
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6.5 \
Product color	Black
Volume control	Buttons
Country of origin	China
Audio formats supported	MP3 VBR, MP4, WAV
Bluetooth version	5.3
Connectivity technology	Wired & Wireless
Export Control Classification Number (ECCN)	85182100
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	35 W
Package depth	478 mm
Package height	1010 mm
Package weight	10300 g
Cables included	AC, HDMI, Optical

Weight and Dimensions

Depth	90 mm
Width	920 mm
Height	60 mm
Cord length	1.5 m
Soundbar weight	2900 g
Subwoofer depth	304 mm
Subwoofer width	214 mm
Subwoofer height	294 mm
Subwoofer weight	5200 g