EasyManuals Logo
Home>Hisense>Speaker System>HS312

Hisense HS312 User Manual

Hisense HS312
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Placement and Mounting
Placement
A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand,
centered with the TV screen.
B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
Wall Mounting (if using option-B)
Note:
- Installation must be carried out by qualied
personnel only. Incorrect assembly can result in
severe personal injury and property damage (if
you intend to install this product yourself, you
must check for installations such as electrical
wiring and plumbing that may be buried inside
the wall). It is the installers responsibility to
verify that the wall will safely support the total load of the unit and wall brackets.
- Additional tools (not included) are required for the installation.
- Do not overtighten screws.
- Keep this instruction manual for future reference.
- Use an electronic stud nder to check the wall type before drilling and mounting.
1. Drill 2 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the
holes should be 944 mm.
2. Firmly x 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets on the wall
with screws and screwdriver. Make sure that they are securely installed.
3. Remove the screws at the back of the unit. Install the wall mounting screws into the back of the unit.
4. Lift the unit onto the wall mount brackets and slot into place.
1
2
3
944mm
4
AB

Other manuals for Hisense HS312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense HS312 and is the answer not in the manual?

Hisense HS312 Specifications

General IconGeneral
Audio decodersDolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power300 W
Audio output channels3.1 channels
Subwoofer typeActive subwoofer
Subwoofer includedYes
Subwoofer locationSeparate
Subwoofer connectivityWireless
Subwoofer frequency range40 - 120 Hz
Wi-FiNo
HDMI in2
HDMI ports quantity3
Connectivity technologyWired & Wireless
Digital audio optical in1
Product colorBlack
Number of speakers6
Soundbar speaker RMS power180 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Soundbar power consumption20 W
Power consumption (standby)0.5 W
Subwoofer power consumption30 W
Cables includedAC, HDMI
Package depth270 mm
Package width1090 mm
Package height365 mm
Package weight10600 g
Weight and Dimensions IconWeight and Dimensions
Depth90 mm
Width980 mm
Height58 mm
Subwoofer depth420 mm
Subwoofer width240 mm

Related product manuals