Hisense HV643D60UK User Manual

Greener dishwashing
Save energy and water
When using a dishwasher in a residential setting, less energy and water are generally used compared
to washing the dishes by hand.
Do not rinse under running water
Do not rinse the dishes under running water as this will lead to increased energy and water consumption.
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Too much detergent, rinse aid and salt can result in less effective dishwashing and also entail greater
environmental impact.
Run a fully loaded dishwasher
Save energy and water by waiting until the dishwasher is full before running a program (see number
of standard place settings). Use the 1h 65° program with the Speed wash option to rinse the
dishes if there are any unpleasant odours.
Run programs at a lower temperature
If the dishes are only slightly dirty, you can select a program with a low temperature.
Select dishwashing program – Eco 55°
This program is suitable for washing normally soiled dishes and is the most effective program in terms
of combined energy and water consumption. This program is used to assess compliance with EU
legislation on ecodesign.
The dishwashing program is designed for an effective wash using as little energy and water as possible.
The program washes at a low temperature for a long time.
Activate the – Auto Dry setting
A shorter dishwashing program and better drying results are achieved if you activate the Auto Dry
setting, which automatically opens the dishwasher door. Wait until the dishwasher indicates that the
program has ended and the dishes have cooled before unloading the dishwasher. (If the dishwasher
is built-in, the surrounding furnishings must be resistant to any condensation from the dishwasher.)
Connect to cold water
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an
energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot
water connection reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
9

Hisense HV643D60UK Specifications

General

Door color	Black
Water fill	Cold, Hot
Cord length	1.73 m
Control type	Touch
Display type	LED
Product size	Full size (60 cm)
Tub material	Stainless steel
Inlet hose length	1.75 m
Number of baskets	3 basket(s)
Custom panel-ready	Yes
Outlet hose length	1.5 m
Appliance placement	Fully built-in
Door panel included	No
Cutlery compartment type	Drawer
Baskets adjustable placement	Upper
Cycle time	175 min
Noise level	44 dB
Drying system	Residual heat
Delay start (max)	24 h
Dishwashing programs	60min 65°C, Auto 45-65°C, Delicate 40°C, Eco 50°C, Hygiene 70°C, Intensive 70°C
Number of spray zones	5
Number of place settings	16 place settings
Number of washing programs	6
Number of temperature settings	7
Cycle time (quick washing program)	15 min
Country of origin	Slovenia
Package depth	665 mm
Package width	640 mm
Package height	880 mm
Package weight	34500 g
Current	10 A
Connected load	1900 W
Power plug type	Type G
AC input voltage	220-240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (left-on)	0.49 W
Water consumption per cycle	11 L
Energy consumption per cycle	0.85 kWh

Weight and Dimensions

Depth	555 mm
Width	598 mm
Height	816 mm
Weight	32500 g
Installation compartment width	600 mm
Installation compartment height	820 mm
Installation compartment height (max)	900 mm