Hisense PX2-PRO User Manual

11
FIT THE BOTTOM OF THE IMAGE TO THE SCREEN
• If the image shifts to the left side, then move the Laser
Cinema to the right.
If the image shifts to the right side, then move the Laser
Cinema to the left.
STEP 3 Adjust the Display Image and the Screen
Follow the steps in the order shown below, only if they apply to your situation.
Note: Before adjusting, fold the wall-mount bracket wands so that screen is vertically level. Rotate feet from an overlooking view, but
do not look directly at the lens when this device is on because the laser light may damage your eyes.
PARALLEL THE BOTTOM OF THE IMAGE WITH THE SCREEN
If the bottom of the image is lower on the left and higher on the
right, rotate the device counterclockwise.
If the bottom of the image is lower on the right and higher on
the left, rotate the device clockwise.

Hisense PX2-PRO Specifications

General

HDCP	-
Video apps	4oD, All 4, Amazon Prime Video, Apple TV, BBC iPlayer, DAZN, Disney+, ITV X, Netflix, Paramount+, YouTube
Noise level	36 dB
Screen mirroring	Yes
Country of origin	China
Operating system installed	VIDAA U
High Dynamic Range (HDR) technology	Dolby Vision
Package volume	0 cm³
Native aspect ratio	16:9
Contrast ratio (typical)	3000:1
Projector native resolution	2160p (3840x2160)
Light source type	Laser
Service life of light source	25000 h
Throw ratio	.25
Product color	Black
Built-in display	No
HDMI ports quantity	3
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	0
Audio decoders	Dolby Atmos
RMS rated power	30 W
Number of built-in speakers	2
Power consumption (standby)	0.5 W
Power consumption (typical)	200 W
Cables included	AC

Weight and Dimensions

Depth	324 mm
Width	520 mm
Height	160 mm
Package depth	401 mm
Package width	604 mm
Package height	295 mm
Package weight	12000 g