Hisense PX2-PRO User Manual

23
FCC Notice
This device has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this device does cause harmful
interference to radio or Laser Cinema reception, which can
be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/Laser Cinema
technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR LASER CINEMA INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Declaration of Conformity
Trade Name: Hisense
Model: PX1
Responsible Party: Hisense USA Corporation
Address: 105 Satellite BLVD Suite I, Suwanee, GA 30024
Telephone Number: 1-888-935-8880
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
©2023. All rights reserved. Hisense and the Hisense logo are
registered trademarks of Hisense. Other brand and product names
are registered trademarks of their respective owners.
Certification and Compliance
©2016. All rights reserved. Hisense and the Hisense logo are registered
trademarks of Hisense. Other brand and product names are registered
trademarks of their respective owners.
The Wi-Fi Module complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This device should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation. Manufactured under
license from Dolby Laboratories. Confidential unpublished works. Copyright ©
2012–2022 Dolby Laboratories. All rights reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, DTS-HD Master Audio, DTS-HD,
Virtual:X, and the DTS-HD logo are registered trademarks or trademarks
of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL
RIGHTS RESERVED.

Hisense PX2-PRO Specifications

General

HDCP	-
Video apps	4oD, All 4, Amazon Prime Video, Apple TV, BBC iPlayer, DAZN, Disney+, ITV X, Netflix, Paramount+, YouTube
Noise level	36 dB
Screen mirroring	Yes
Country of origin	China
Operating system installed	VIDAA U
High Dynamic Range (HDR) technology	Dolby Vision
Package volume	0 cm³
Native aspect ratio	16:9
Contrast ratio (typical)	3000:1
Projector native resolution	2160p (3840x2160)
Light source type	Laser
Service life of light source	25000 h
Throw ratio	.25
Product color	Black
Built-in display	No
HDMI ports quantity	3
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	0
Audio decoders	Dolby Atmos
RMS rated power	30 W
Number of built-in speakers	2
Power consumption (standby)	0.5 W
Power consumption (typical)	200 W
Cables included	AC

Weight and Dimensions

Depth	324 mm
Width	520 mm
Height	160 mm
Package depth	401 mm
Package width	604 mm
Package height	295 mm
Package weight	12000 g