15
4.3 Defrost mode
4.3.1 Automatic defrost mode
When compressor accumulated running time reach the setting point, it will enter defrost
mode automatically.
4.3.2 Force Defrosting Mode
Within 10 minutes since the power on , keep pressing the “ZONE” &”TEMP.” button at the
same time for 3 seconds, then until the display board shows
“
dF”
,
it means into the Force
Defrosting process.
–– When into the force defrosting process, the specific operating will follow the way of
defrosting Mode control.
4.3.3 Defrost flow