Rinse hold
Delay
Select programme , temperature and options.
This function is only suitable for spin programme.
For the Spin Programme,pressing the button to select any one kind of time
such as 5 minutes, 8 minutes, 10 minutes, 14 minutes.
Spin Speed
Every programme has a predefined spin speed .
Press the button to set another spin speed.
If spin speed “0”se lected, the final spinning is cancelled, and the
is drained out only.
However,intermediate spin phases remin during water
rinse.
without progressing to the final spin cycle, to avoid creasing and prevent colours
If you selected “Rinse hold”,the laundry remains in the last rinse water
from changing.
To terminate the “Rinse Hold” by draining the water, without any
spinning, press the “Start /Pause” button.
To terminate the “Rinse Hold” by spinning the laundry, press the “Spin”
button to select the desired spin speed and then “Start /Pause” to start the spin
cycle.
The delay allows to run the machine at the consumer
’s convenience, for
example at night when electricity is cheaper.
To Next Page
Loading...
Need help?
General