Hisense XQG70-HR1014 User Manual

Version 1
Customer Service
After every 50whole cycles, the indication light“ ”light up until the user
select“Drum Clear”programme to clean the drum.
Reset a running programme before the end
The “Reset”button cancels a programme before the end.
Any existing water is drained out before the door can be opened.
Form clear
Press the “Form Clear”button before the prohgramme start,when the last
rinse ,the machine can adjust the level and the strength of the water to clear the foam
remain.
Suggest drum clean
Turn the programme selector to the “Off”position.
Close the water tap.
Open the door and unload the machine.
Leave the door open to allow the drum to dry.
Change programme and/or options after programme start
Press the “Start/Pause”button to pause the programme.
Select the new programme (with temperature),any options and another spin
speed if you want.
Press the “Start/Pause”button again. The new programme continues at the
same position where the previous programme was interrupted.Do not add detergent
for this programme.
Press the “Reset”button for at least 3 second.

Hisense XQG70-HR1014 Specifications

General

Model	XQG70-HR1014
Loading Type	Front Load
Capacity	7 kg
Energy Rating	A+++
Color	White
Water Consumption	48 L

Summary

Safety Precautions

1.1 Illegal Spare Parts

1.2 Safe Ground Connection

Ensure proper grounding of the appliance and avoid using incompatible plugs or transformers for electrical safety.

1.3 Usage Attention and Maintenance Safety

Always disconnect power before cleaning/maintenance and unplug the cord after use for user safety.

Appliance Specifications

Control Panel Overview

Washer Functions and Operation

Washing Machine Installation

Removing Transport Bolts

Instructions for removing transport bolts before using the washer to prevent damage to the appliance.

Leveling the Appliance

Steps for leveling the washing machine by adjusting its feet for stable installation on any floor surface.

Connecting Water Inlet Hose

Guidance for connecting the cold and hot water inlet hoses to the appliance and the water tap securely.

Hot and Cold Water Fill

Drain Hose Connection

Electrical Hookup Guidelines

Safe electrical connection guidelines, emphasizing an earthed socket and avoiding extension cords or multi-sockets.

Troubleshooting and Maintenance

Initiating Service Test Cycle

Error Code Explanations

Explanation of error codes displayed by the machine and recommended troubleshooting steps for common failures.