Playing some DVDs can be limited depending
on the age of users. The Parental Control func-
tion allows playback limitation level to be set by
the parent.
Parental Level can be adjusted to one of the
eight levels. Level 8 ADULT adjustment let you
watch all of the DVD titles ignoring the DVD
discs parental level. You can watch the DVD
discs, which has the same or lower parental
level than the players level only.
PASSWORD (Change Password):
Using this item you can change the current pass-
word.
To change the password you will be prompted
to enter your old password. After you have en-
tered your old password, you can now enter the
new 4-digit password.
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is 0000.
You have to enter XXXX digital password every
time you want to change the parental level. If you
forget your password please contact technical
service.
Troubleshooting
The picture quality is poor (DVD)
Make sure the DVD disc surface is not dam-
aged. (Scratch, fingerprint etc.)
Clean the DVD disc and try again.
- See instructions described in Notes on
Discs to clean your disc properly.
Ensure that the DVD disc is in the drawer with
the label uppermost.
A damp DVD disc or condensation may effect
the equipment. Wait for 1 to 2 hours in Stand-
by to dry the equipment.
Disc does not play
No disc in the machine.
- - Place a disc into the loader.
Disc incorrectly loaded.
- Ensure that the DVD disc is in the drawer
with the label uppermost.
Wrong type of disc. The machine cannot play
CD-ROMS etc.
The region code of the DVD must match the
player.
Wrong OSD language
Select the language in the set-up menu.
The language for the sound or subtitles on a
DVD cannot be changed.
Multilingual sound and/or subtitles not re-
corded on the DVD.
Try to change the sound or subtitles using
DVDs title menu. Some DVDs do not allow
the user to change these settings without us-
ing the discs menu
Some functions (Angle, Zoom etc) do not
work
These functions are not available on the DVD.
Angle can only be changed when the angle
symbol is displayed.
No picture
Have you pressed the correct buttons on the
remote control? Try once more.
No sound
Check the volume is set to an audible level.
Make sure you have not switched the sound off
accidentally.
Distorted sound
Check that the appropriate listening mode
setting is correct.
No response from remote control
Make sure the remote control is in the correct
mode.
Check batteries are fitted correctly.
Change the batteries.
If nothing works
If you have tried the above solutions and none
seem to work, try switching your TV-DVD off and
on again. If this does not work, contact your sup-
plier or TV-DVD repair technician. Never attempt
to repair a defective TV-DVD yourself.
ENG-02-DVD-22784W-1165UK-MB29-PEUIDTV-(DVD7240-X2TSF-WO DIVX)-10060401-5013xxxx.p6511.10.2008, 17:3659
To Next Page
Loading...
Need help?
General