Hitachi CP-EX250 User Manual

4
Introduction
►Do not open or remove any portion of the product, unless the
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on.
WARNING
►Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens because it could damage the lens,
such as melting the lens.
CAUTION
(continued on next page)
Part names
(1) Lamp cover (65)
The lamp unit is inside.
(2) Speaker (
20, 46)
(3) Filter cover (67)
The air lter and intake vent are inside.
(4) Elevator feet (x2) (24)
(5) Elevator button (24)
(6) Remote sensor (17)
(7) Lens (69)
(8) Intake vents
(9) Control panel (5)
(10) FOCUS ring (24)
(11) ZOOM ring (24)
(12) AC (AC inlet) (14)
(13) Exhaust vent
(14) Rear panel (5)
(7)
(4)(5)
(6)
(8)
(3)
(2)
(12)
(13)
(14) (9)
(9)
(1)
(11)
(10)
(4)

Hitachi CP-EX250 Specifications

General

Native aspect ratio	4:3
Projection distance	0.9 - 9.1 m
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Focal length range	- mm
Lamp type	UHP
Lamp power	215 W
Light source type	Lamp
Service life of light source	- h
Full HD	No
RMS rated power	1 W
USB 2.0 ports quantity	3
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Noise level	- dB
Product type	Portable projector
Product color	White
Market positioning	Portable
Power source	AC
Power consumption (standby)	- W
Power consumption (typical)	320 W
Operating temperature (T-T)	5 - 35 °C
Sustainability certificates	RoHS

Weight and Dimensions

Weight	2900 g