Hitachi CP-EX250 User Manual

43
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item Description
KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image
ó
Shrink the top of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
AUTO ECO MODE
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON
ó
OFF
• When ON is selected, the projector will always be set to Eco mode
at start-up regardless of the ECO MODE (

44) setting. An OSD
message “AUTO ECO MODE” will be displayed for a while when
the projector starts with this function activated.
(continued on next page)

Hitachi CP-EX250 Specifications

General

Native aspect ratio	4:3
Projection distance	0.9 - 9.1 m
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Focal length range	- mm
Lamp type	UHP
Lamp power	215 W
Light source type	Lamp
Service life of light source	- h
Full HD	No
RMS rated power	1 W
USB 2.0 ports quantity	3
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Noise level	- dB
Product type	Portable projector
Product color	White
Market positioning	Portable
Power source	AC
Power consumption (standby)	- W
Power consumption (typical)	320 W
Operating temperature (T-T)	5 - 35 °C
Sustainability certificates	RoHS

Weight and Dimensions

Weight	2900 g