Hitachi NP 35A User Manual

8
English
SPECIFICATIONS
Operating pressure 64 – 100 psi (4.4 – 6.9 bar 4.5 – 7 kgf/cm
2
)
Dimensions
Length × Height × Width
9-3/8″ × 6-3/8″ × 1-27/32″
(238 mm × 162 mm × 47 mm)
Weight 2.0 lbs. (0.9 kg)
Nail capacity 100 nails
Air consumption
.018 ft
3
/cycle at 100 psi
(.5 ltr/cycle at 6.9 bar)
(.5 ltr/cycle at 7 kgf/cm
2
)
Air inlet 3/8 NPT Thread
NAIL SELECTION
WARNING
Be sure to use only the genuine ●
HITACHI nails for the NP35A. The
use of any other nails can result
in tool malfunction and/or nail
breakdown, leading to serious
injuries.
Only nails shown in the Table below can be
driven with this Nailer.
15 Gauge pin nails
Min. Max.
.024″
(0.6 mm)
.024″
(0.6 mm)
5/8″ (15 mm)
1-3/8″ (35 mm)
ACCESSORIES
WARNING
Accessories other than those shown ●
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
3
2
1
1
Eye protection 1
2
Allen wrench for M4
screw
1
3
Nose cap (A) 2
OPTIONAL ACCESSORIES
... sold separately
Pneumatic tool lubricant ○
1 oz. (30 cc) oil feeder (Code No. 877153)
4 oz. (120 cc) oil feeder (Code No. 874042)
1 quart (1 ltr) can (Code No. 876212)
NOTE
Accessories are subject to change without
any obligation on the part of HITACHI.
APPLICATIONS
Installation of decorated plywood such ○
as baseboards and edgings in interiors of
buildings.
000BookNP35AUS.indb8000BookNP35AUS.indb8 2009/08/1015:44:442009/08/1015:44:44

Hitachi NP 35A Specifications

General

Brand	Hitachi
Model	NP 35A
Category	Nail Gun
Language	English