38
GENERAL FEATURES AND USE
■
The Control Panel is a touch panel made of glass. To change a setting, just touch and switch the setting.
Control Panel
Display area
Touch area
● Approximately two minutes after the end of operation, indicator lamps, excluding
FRE
EZER,
REF
RIGERATOR,
EN
ERGY SAVING,
QUIC
K,
WA
TER and eco, become unlit for energy saves.
● To con rm settings, open a refrigerator door or touch any button. The indicator lamps become lit again.
● When opening a refrigerator door, the displayed characters become lit. They become unlit about 15 seconds after shutting it.
● Response of the touch panel may change depending on the surrounding temperature, humidity, physical condition of the
user or operation status of the adjoining electric product.
●
Release a nger and touch the panel again if the panel does not respond after touching it. False detection may occur (it may be kept
pressed) if the time interval between key touches is too short. Response of the touch panel does not improve even if strongly touching it.
● Be sure to operate the Control Panel with all the doors closed. It remains inactive when you touch the Control Panel with
a refrigerator door opened or displayed characters blinking.
● When a door remains open for 30 minutes or more, Door Alarm is raised to indicate it.
Pg.58
● The panel may not respond if it is wet or dirty.
■
Blinking
(Locking the Control Panel) indicates that the refrigerator is in an abnormal state.
Pg.56
Notice
Notice
Providing information
Selecting an ice making mode
Adjusting temperature settings
Setting the Vacuum Compartment
Selecting a cooling mode
eco operation indicator lamp
(Locking the
Control Panel)
Pg.58
You can select a mode from
NORMAL, QUICK and
OFF.
Pg.47
Set temperature for each
compartment.
Normally, use the
M
ID. setting.
Refrigerator Compartment
Pg.42
Freezer Compartment
Pg.44
Vegetable Compartment
Pg.50
Set the compartment to AUTO,
SUBZERO or CHILLER,
depending on the food to be stored
●
When all the indicator lamps are unlit,
the compartment can be used as an
ice-temperature one.
Pg.40
Set a cooling mode for each
compartment.
FREE
ZER
Pg.45
REF
R
IGERATOR
Pg.42
“
EN
ERGY SAVING
”
Pg.39
All the indicator lamps are lit
for the sake of explanation.
●
CLEANING
(Ice Maker Cleaning)
Allows you to wash the
ice tray and water supply
channel.
Pg.53
WATER
Pg.47
AUTO DOOR
Pg.48
● Allows you to prevent
erroneous operation
on the Control Panel.
●
Is lit when the
refrigerator is
operated with a low
energy consumption,
such as in Frost
Recycle Cooling.
Pg.58
●
You can also turn off
the indicator lamp.
Pg.58
●
When the water level in
the water supply container
becomes low, this lamp is
lit automatically.
● Allows you to enable
or disable the Auto
Door function.
To Next Page
Loading...
Need help?
General
