Hitachi Virtual Storage Platform E Series User Manual

Chapter 2: SIM code lists
This chapter describes the lists of the SIM reference codes that are reported when
failures occur in storage systems, and a matrix of drive box numbers, CDEV numbers,
and RDEV numbers.
Columns in the SIM code lists
The SIM code list tables have columns shown below.
The description of each column is as follows:
1: SIM code number. x is a variable value.
2: Brief description of the failure
3: Failed location in the storage system
4: Severity of the failure
Item Description
SERVICE Mild failure
MODERATE Partial failure
SERIOUS The failure part stops operation.
ACUTE The entire storage system stops operation.
5: With or without host report
6: Document to be referenced for troubleshooting by users. For the document title, see
the legends for the table in SIM code list for troubleshooting by users (on page 11) .
Only that table has this column.
Chapter 2: SIM code lists
SIM Reference Guide for VSP E Series, and VSP G130, G/F350, G/F370, G/F700, G/F900 10

Hitachi Virtual Storage Platform E Series Specifications

General

Storage Type	Hybrid Flash Array
Maximum Host Connectivity Ports	Up to 64 ports (VSP E990)
Supported Protocols	FC, FCoE, iSCSI, NVMe-oF
Maximum Cache Memory	Up to 768 GB (VSP E990)
RAID Levels Supported	RAID 5, RAID 6
Data Reduction Features	Deduplication, Compression
Data Protection	Snapshot, Replication
High Availability	Redundant components, Non-disruptive upgrades
Management Interface	GUI, CLI, REST API
Supported Operating Systems	Windows, Linux, VMware
Form Factor	Rack-mounted
Power Supply	Redundant power supplies
Warranty	Varies by region and model
Drive Types Supported	SSD, SAS HDD
Scalability	Scale-up and scale-out
Host Interface	Fibre Channel (FC), iSCSI, NVMe-oF, FCoE
Cache Memory	Up to 768 GB (VSP E990)