Hitachi Virtual Storage Platform E Series User Manual

Reference
code Failure
Alert level
(Severity)
Host
report
Reference
document
ee0000 Volume I/O upper limit
reached
QoS alert SERVICE Yes Performance
Manager
ee1000 Volume I/O lower limit
not reached
QoS alert SERVICE Yes Performance
Manager
ee2000 Volume I/O response
delay
QoS alert SERVICE Yes Performance
Manager
Legend:
■
Yes: This SIM performs the host report.
■
No: This SIM does not perform the host report.
■
x: A hexadecimal number from 0 to f.
■
Audit Log: SIM Codes in the Hitachi Audit Log User Guide
■
Encryption License Key: Troubleshooting in the Encryption License Key User Guide
■
Provisioning: Troubleshooting for provisioning in the Provisioning Guide.
■
Thin Image: Troubleshooting Thin Image in the Hitachi Thin Image User Guide.
■
CCI: Troubleshooting in the Command Control Interface User and Reference Guide.
Notes:
1. xxx indicates the server ID of Storage Advisor Embedded.
2. x = 1: An error occurred in CTL1.
x = 2: An error occurred in CTL2.
SIM code list for troubleshooting by service personnel
The following table lists and describes the SIM codes that require action or restoration by
service personnel. If a SIM in the table is output, contact customer support.
If you select Host Report for Notication Alert in the Set Up Alert Notications
window, alert notication for SIMs that are reported to the host is sent. If you select All,
alert notication for all SIMs is sent.
Reference
code Description Section
Alert level
(Severity) Host report
1420xx Transmitted data abnormality
between MP and GUM
Processor MODERATE Yes
180000 Audit Log lost DKC environment MODERATE Yes
SIM code list for troubleshooting by service personnel
Chapter 2: SIM code lists
SIM Reference Guide for VSP E Series, and VSP G130, G/F350, G/F370, G/F700, G/F900 13

Hitachi Virtual Storage Platform E Series Specifications

General

Brand	Hitachi
Model	Virtual Storage Platform E Series
Category	Storage
Language	English