1-10
If the clutch in the transmission slips, the indicator lights and
the transmission is returned to neutral. Once the key switch is
turned OFF, the check transmission indicator will go OFF. How-
ever, if the clutch slips again, the indicator will light again.
If the transmission oil filter becomes clogged, the transmission
oil filter restriction indicator and the service required indicator
will light. Replace the oil filter.
If the hydraulic oil temperature becomes higher than 104 °C,
the hydraulic oil temperature indicator will light, the service
required indicator will flash and the alarm buzzer will sound.
Immediately stop machine operation and wait for the hydrau-
lic oil to cool before continuing operation.
If the transmission oil temperature becomes higher than 110
°C on the ZW220 and the ZW250, or 120°C on the ZW310, the
transmission oil temperature indicator will light, the service re-
quired indicator will flash and the alarm buzzer will sound. Im-
mediately stop machine operation and wait for the hydraulic
oil to cool before continuing operation.
M4GB-01-024
M4GB-01-025
M4GB-01-026
M4GB-01-027
To Next Page
Loading...
Need help?
General
