Vehicle care 151
Wiper blade replacement
Regularly check the condition of the
wiper blades.
1. Lift the wiper arm.
2. Press the release lever and
detach the wiper blade.
For wiper blade cleaning, see
Windows and windscreen wiper
blades on page 182.
Bulb replacement
Contact a trained service technician
if unsure about the bulb replacement
process.
When replacing bulbs:
• Turn the ignition off and remove
the key.
• Turn off related switches.
• Fit bulbs of the specied
wattage only.
• Do not touch bulbs or reectors
with bare hands.
• Clean stained bulbs with
methylated spirits.
Bulbs to be changed by
a Holden Dealer
• Fog lamps
• Centre high-mounted stop lamp
Caution
Condensation may temporarily
appear on the inside of exterior
lamp lenses after rain or washing
the vehicle. Condensation occurs
when there is a temperature
difference between the inside and
outside of the lamp allowing a
ne mist on the inside surface of
the lamp lens. This condensation
will disappear when the vehicle is
in a dry environment or the lamp
is on. If water does collect in the
lamp contact a Holden Dealer.
MY15_BARINA SPARK_BOOK.indb 151 14/07/2014 12:00:49 PM
To Next Page
Loading...
Need help?
General
