Honda 2006 Element User Manual

Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability.
Always change the oil and filter
according to the recommendations in
the maintenance schedule. The oil
and filter collect contaminants that
can damage your engine if they are
not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
Run the engine until it reaches
normal operating temperature,
then shut it off.
You may use a synthetic motor oil if
it meets the same requirements
given for a conventional motor oil: it
displays the API certification seal,
and it is the proper weight. You must
follow the oil and filter change
intervals given on the maintenance
schedule.
1.
2.
CONTINUED
Synthetic Oil
Engine Oil Additives
Changing the Oil and Filter
Adding Engine Oil, Changing the Oil and Filter
Maintenance
171
WASHER
OIL DRAIN BOLT
０５／０９／１３ ２０：０２：５１ ３１ＳＣＶ６３０ ０１７６

Honda 2006 Element Specifications

General

Brand	Honda
Model	2006 Element
Category	Automobile
Language	English